Hydraulic Hose Fittings and Adaptors for Ghana

Thread and connection families

BSP (parallel and taper), JIC 37°, ORFS (O-ring face seal), metric DIN light and heavy series, NPT, SAE code 61 and code 62 flanges, staple-lock (common on underground equipment), ferrules matched to each hose series, and straight, 45° and 90° adaptors. Non-standard fittings can be made to drawing or sample.

Thread families on Ghanaian fleets

[INF] A mixed fleet may include machines from several design traditions. The following are identification clues only; verify the actual thread, sealing seat and machine specification: - US-designed mining trucks, shovels and dozers typically use ORFS and JIC fittings, plus SAE code 61/62 split-flange connections on large-bore lines. - European-designed drills, loaders and underground machines often use metric DIN fittings and, underground, staple-lock connections. - Japanese-designed excavators use JIS and BSP-type connections on many circuits, which are easily confused with BSP. - Chinese-built machines commonly use metric 24° cone connections, with some BSP and ORFS depending on the model.

If your company acquires a mixed fleet, several connection families may be present at once. When you send photos or a sample, we confirm the thread, seat angle and size in writing before quoting. That check reduces the risk of ordering an incompatible fitting.

Corrosion options for humid and coastal sites

[FACT] The 2017 Tarkwa-Nsuaem municipal profile describes 70–80 % relative humidity and acidic, leached soils for that municipality. [INF] Coastal equipment may also face salt exposure. Plain zinc plating can show red rust quickly in those conditions, particularly on low-mounted lines and on port equipment. Zinc-nickel plated and stainless-steel fittings can be offered where corrosion is the main failure. Tell us where the fitting sits on the machine and we will suggest whether the upgrade is worth the cost for that position.

A workshop buying list for Ghanaian hose shops

If you crimp hoses for mining contractors or plants, a fittings list matched to the equipment you support can reduce avoidable gaps. A practical starting list: 1. Ferrules for each hose series you crimp, in the sizes you stock hose 2. JIC and ORFS female swivels, straight and 90°, in the common mobile-machine sizes 3. Metric DIN light and heavy series female fittings for European and Chinese machines 4. SAE code 61 and 62 flange heads and clamp halves for large-bore lines 5. BSP female swivels and male adaptors for fixed plant and pumps 6. Staple-lock fittings if you serve underground operations 7. A set of adaptors between JIC, ORFS, BSP and metric for emergency conversions

We quote this kind of mixed list, with the thread and size for each line confirmed. Companies supplying fittings to mines should read Local Supply Partners.